Crochet Ideas

14 Adorable Crochet Dinosaurs and Prehistoric Plushies

Discover fourteen colorful crochet dinosaurs and prehistoric plushies, from a plated stegosaurus and horned triceratops to a woolly mammoth, pteranodon and ammonite, with detailed US-term instructions and assembly tips.

Handmade crochet inspiration for 14 adorable crochet dinosaurs and prehistoric plushies

Explore a colorful collection of crochet dinosaurs and prehistoric plushies, each with a distinctive silhouette, palette and stitch detail. The step-by-step guides use US crochet terms and include materials, approximate finished sizes, shaping instructions and model-specific assembly notes. For soft keepsakes, embroidered facial features are a simple alternative to plastic parts; choose details and finishing methods appropriate to the intended recipient.

01

Sage Stegosaurus with Buttercup Plates

Sage Stegosaurus with Buttercup Plates crochet design

A low, four-legged sage stegosaurus carries a striking row of butter-yellow plates from its head to its tail. A pale belly and rounded silhouette make the classic prehistoric shape instantly recognizable and display-friendly.

LEVEL
Confident beginner
TRY IT WITH
Worsted #4 yarn: sage 100 yd, butter yellow 45 yd, cream 20 yd; 3.5 mm hook; stuffing; tapestry needle
FINISHING NOTE
About 8 in long (20 cm).

Short Pattern

Abbreviations: ch chain · sc single crochet · inc increase · dec invisible decrease · sl st slip stitch · BLO back loop only · MR magic ring

  1. Body: ch 10; work around both sides of the chain, increasing at each end to form an oval. Continue in joined rounds, increasing at the shoulders and hips until the body is about 4 in wide. Work 8 rounds even and stuff firmly.
  2. Belly: crochet a cream oval to match the underside and sew it centered along the lower body. Make a sage head as a small rounded oval, increasing to 30 sc and working 6 rounds even before shaping the snout.
  3. Legs: make four short tapered tubes, slightly larger for the hind legs. Plates: crochet 7 small triangles in butter yellow, increasing from 3 sc to 9 sc, then work a final row evenly.
  4. Sew head to the front of the body and attach the four legs underneath in pairs. Stitch the plates in a straight line from crown to tail, alternating their size; embroider eyes and small nostrils.

Assembly: Pin the plates before sewing to keep their spacing even. Reinforce each triangle base with several stitches so the ridge stays upright without stiff wire.

02

Blue Triceratops with Coral Frill

Blue Triceratops with Coral Frill crochet design

This dusty-blue triceratops has a broad coral-edged frill, two brow horns and one short nose horn. Cream toes and belly add contrast, while the squat four-legged stance keeps it clearly dinosaur-shaped.

LEVEL
Intermediate
TRY IT WITH
Worsted #4 yarn: dusty blue 100 yd, coral 30 yd, cream 25 yd; 3.5 mm hook; stuffing
FINISHING NOTE
About 8 in long (20 cm).

Short Pattern

Abbreviations: ch chain · sc single crochet · inc increase · dec invisible decrease · sl st slip stitch · BLO back loop only · MR magic ring

  1. Body: crochet an oval from a foundation chain, increasing at both ends. Work 7 rounds even for the torso, then taper toward the neck; stuff and close the rear opening.
  2. Head: make a wide rounded piece, increasing to 36 sc. Work 5 rounds even, then shape the muzzle with two decrease rounds. Crochet a flat scalloped frill by working increases around a wide circle and edging in coral.
  3. Horns: make two short tapered cones for the brow and one smaller cone for the nose. Crochet four legs as short tubes with cream toe caps; lightly stuff the legs.
  4. Sew the head to the neck, position the frill behind the crown and stitch it along the curved base. Attach the horns symmetrically and place the legs under the body so all four feet rest flat.

Assembly: Keep the frill broad and flat rather than folding it like wings. Reinforce each horn at its base and check the pair of brow horns from the front before securing.

03

Teal Brachiosaurus with Peach Spots

Teal Brachiosaurus with Peach Spots crochet design

A tall teal brachiosaurus stands on four sturdy legs with a very long upright neck, peach belly and tiny matching back spots. Its towering profile is deliberately different from the lower, plated dinosaurs.

LEVEL
Intermediate
TRY IT WITH
Worsted #4 yarn: teal 115 yd, peach 35 yd, cream 15 yd; 3.5 mm hook; stuffing
FINISHING NOTE
About 11 in tall (28 cm).

Short Pattern

Abbreviations: ch chain · sc single crochet · inc increase · dec invisible decrease · sl st slip stitch · BLO back loop only · MR magic ring

  1. Body: crochet a rounded oval torso in teal, increasing to 36 sc and working 8 rounds even. Shape a long tail by continuing in decreasing rounds from the back; stuff the torso firmly.
  2. Neck: work a long narrow tube in teal, increasing to 24 sc at the base and keeping 18–20 sc for the upper length. Stuff in small sections so the neck stays smooth and upright.
  3. Head: crochet a small rounded head with a blunt muzzle. Add a peach underside panel and 8–10 peach spots as tiny embroidered circles along the back.
  4. Attach the neck at the front of the torso, angling it slightly forward. Sew on the head, then add four sturdy legs at the body corners and secure the long tail at the rear.

Assembly: Use dense stitches and firm stuffing in the neck so it holds its upright shape. Check that all four feet support the body before tightening the leg seams.

04

Lavender Ankylosaurus with Armor Plates

Lavender Ankylosaurus with Armor Plates crochet design

A vivid lavender ankylosaurus features coral and cream armor plates and a rounded club tail. Its low body, plated back and heavy tail create a bold silhouette that stands apart from winged or horned fantasy creatures.

LEVEL
Intermediate
TRY IT WITH
Worsted #4 yarn: lavender 110 yd, coral 30 yd, cream 25 yd; 3.5 mm hook; stuffing
FINISHING NOTE
About 8 in long (20 cm).

Short Pattern

Abbreviations: ch chain · sc single crochet · inc increase · dec invisible decrease · sl st slip stitch · BLO back loop only · MR magic ring

  1. Body: crochet a low oval in lavender, increasing to 42 sc and working 9 rounds even. Decrease at the rear, stuff firmly, and leave a small opening at the front for the head.
  2. Head: make a compact rounded piece with a blunt muzzle. Crochet four short legs and a long tapered tail; stuff the tail lightly so it can angle downward.
  3. Armor: crochet 9 soft triangular plates in alternating coral and cream. Add 4 small rounded side knobs on each flank using tiny bobble stitches or separate stuffed ovals.
  4. Sew the head and legs to the low body, then attach the tail at the rear. Place plates in two offset rows down the back and finish with a single rounded club at the tail tip.

Assembly: Use one club-shaped end only and secure it firmly to the tail. Keep the armor rows staggered so the back looks textured without hiding the toy’s face.

05

Tangerine T-Rex with Teal Ridge

Tangerine T-Rex with Teal Ridge crochet design

A bright tangerine T-Rex pairs an oversized rounded head and broad jaw with tiny arms, strong legs and a long balancing tail. Teal back ridges and a cream belly add energetic color contrast.

LEVEL
Intermediate
TRY IT WITH
Worsted #4 yarn: tangerine 120 yd, teal 25 yd, cream 30 yd; 3.5 mm hook; stuffing
FINISHING NOTE
About 9 in tall (23 cm).

Short Pattern

Abbreviations: ch chain · sc single crochet · inc increase · dec invisible decrease · sl st slip stitch · BLO back loop only · MR magic ring

  1. Body: crochet a pear-shaped torso in tangerine, increasing to 36 sc and working 7 rounds. Shape a thick neck at the top and taper the lower back into a long tail; stuff as you go.
  2. Head: crochet a large rounded oval with a projecting upper snout and a separate lower jaw in cream. Sew the jaw beneath the muzzle and embroider a curved smile and nostrils.
  3. Legs: make two broad hind legs and two very short arms with two stitched fingers each. Add a line of small teal triangles from the crown along the back to the tail.
  4. Attach the large head to the neck, then sew legs beneath the body so it stands upright. Add arms high on the chest and align the tail behind the hips for balance.

Assembly: Keep the tail firmly stuffed near the base and narrower toward the tip. Embroider the mouth rather than adding loose teeth so the face remains soft and tidy.

06

Coral-Crest Parasaurolophus

Coral-Crest Parasaurolophus crochet design

A coral parasaurolophus has a long backward-curving crest, cream throat and sunny-yellow spots. The signature crest sweeps over the head, giving this four-legged dinosaur a distinctive, elegant outline.

LEVEL
Intermediate
TRY IT WITH
Worsted #4 yarn: coral 105 yd, cream 30 yd, golden yellow 20 yd; 3.5 mm hook; stuffing
FINISHING NOTE
About 9 in long (23 cm).

Short Pattern

Abbreviations: ch chain · sc single crochet · inc increase · dec invisible decrease · sl st slip stitch · BLO back loop only · MR magic ring

  1. Body: crochet a long oval torso, increasing evenly to 36 sc and working 8 rounds. Taper the tail in decreasing rounds; stuff the body and tail firmly enough to hold a gentle curve.
  2. Neck and head: make a sloping neck tube that joins the torso at the front, then crochet a small rounded head with a blunt muzzle. Add a cream throat panel.
  3. Crest: crochet a long narrow tube, curve it backward and stuff lightly. Add small golden spots across the body using surface crochet or embroidered circles.
  4. Sew the neck and head to the torso, then anchor the crest along the crown and backward curve. Attach four short legs and place the feet in a stable, evenly spaced stance.

Assembly: Shape the crest before sewing and pin its curve from the crown backward. Secure it along a few hidden points so it does not flop over the face.

07

Indigo Sail-Back Spinosaurus

Indigo Sail-Back Spinosaurus crochet design

A deep-indigo spinosaurus stands out with a dramatic turquoise sail, lemon belly and long crocodile-like snout. Its broad back sail and four-legged stance create a bold prehistoric look without dragon wings or horns.

LEVEL
Intermediate
TRY IT WITH
Worsted #4 yarn: indigo 115 yd, turquoise 45 yd, lemon 25 yd; 3.5 mm hook; stuffing
FINISHING NOTE
About 10 in long (25 cm).

Short Pattern

Abbreviations: ch chain · sc single crochet · inc increase · dec invisible decrease · sl st slip stitch · BLO back loop only · MR magic ring

  1. Body: crochet a long indigo oval and work 8 rounds even. Shape the neck into a narrow elongated muzzle, then add a long tapered tail; stuff the body densely and the tail lightly.
  2. Sail: crochet a series of turquoise triangles in graduated sizes, from small near the shoulders to tall at mid-back and smaller toward the hips. Join their bases with a narrow strip.
  3. Belly: make a lemon oval panel and sew it along the underside. Add four sturdy legs and small cream claws; embroider a nostril and friendly eye on each side of the snout.
  4. Attach the sail along the spine from shoulders to hips, keeping its tallest points centered. Sew the legs beneath the body and shape the tail straight behind the figure.

Assembly: Stitch the full sail base continuously so the panels do not lean. Keep the snout long and low, and avoid adding wings or horn details.

08

Aqua Pteranodon with Color-Block Wings

Aqua Pteranodon with Color-Block Wings crochet design

This aqua pteranodon has a long toothless beak, small head crest and broad coral-and-cream wings. The stretched wingspan and tiny dangling feet make this prehistoric flyer visually distinct from the ground-dwelling dinosaurs.

LEVEL
Intermediate
TRY IT WITH
Worsted #4 yarn: aqua 75 yd, coral 40 yd, cream 35 yd; 3.5 mm hook; stuffing; optional hanging loop
FINISHING NOTE
About 10 in wingspan (25 cm).

Short Pattern

Abbreviations: ch chain · sc single crochet · inc increase · dec invisible decrease · sl st slip stitch · BLO back loop only · MR magic ring

  1. Body: crochet a small tapered torso in aqua and stuff lightly. Add a long narrow beak and a small curved crest; keep the head compact so the wings remain the focal point.
  2. Wings: make two mirrored wing panels in rows, widening from the shoulder to a broad curved tip. Work coral in the center and cream along the lower edge, then outline with aqua sc.
  3. Legs: crochet two short legs with three small toes each. Add a narrow aqua strip along the leading edge of each wing to define its shape.
  4. Sew the wings to either side of the torso at the same height and angle. Attach the legs beneath the body, then add a reinforced hanging loop at the back if desired.

Assembly: Keep the wings flexible and symmetrical; pin both panels flat before sewing. Make the beak blunt and toothless, and secure any hanging loop through the body.

09

Woolly Mammoth with Ivory Tusks

Woolly Mammoth with Ivory Tusks crochet design

A slate-blue woolly mammoth has a long trunk, curved ivory tusks and a thick cream yarn coat. Its broad, shaggy outline and four sturdy legs bring a different prehistoric texture to the collection.

LEVEL
Intermediate
TRY IT WITH
Worsted #4 yarn: slate blue 100 yd, cream 70 yd, ivory 20 yd; 3.5 mm hook; stuffing
FINISHING NOTE
About 9 in tall (23 cm).

Short Pattern

Abbreviations: ch chain · sc single crochet · inc increase · dec invisible decrease · sl st slip stitch · BLO back loop only · MR magic ring

  1. Body: crochet a sturdy oval in slate blue, increase to 36 sc and work 8 rounds even. Shape the head large and rounded, leaving room for the trunk; stuff the torso firmly.
  2. Trunk: crochet a curved tube, widening at the base and tapering toward the tip. Work two ivory tusks as slim curved cones; keep them lightly stuffed and symmetrical.
  3. Coat: add cream loop stitches or short fringe rows across the crown, shoulders and back. Crochet broad ears and four short legs with cream toe caps.
  4. Sew the head to the body, attach the trunk at the center of the muzzle, then place the tusks on either side. Add ears and legs before layering the shaggy coat.

Assembly: Keep the trunk flexible enough to curve downward and place tusks wide enough to frame it. Anchor the yarn fringe in short rows so it stays secure.

10

Teal Dimetrodon with Sunset Sail

Teal Dimetrodon with Sunset Sail crochet design

A teal dimetrodon carries a tall fan-shaped sail striped in coral and golden yellow. The low four-legged body and broad triangular sail make this prehistoric creature a bright, graphic display piece.

LEVEL
Intermediate
TRY IT WITH
Worsted #4 yarn: teal 100 yd, coral 35 yd, golden yellow 35 yd, cream 20 yd; 3.5 mm hook; stuffing
FINISHING NOTE
About 9 in long (23 cm).

Short Pattern

Abbreviations: ch chain · sc single crochet · inc increase · dec invisible decrease · sl st slip stitch · BLO back loop only · MR magic ring

  1. Body: crochet a long, low oval in teal, increase to 36 sc and work 7 rounds even. Taper both the tail and muzzle, then stuff the torso firmly.
  2. Sail: crochet a wide fan-shaped panel in rows, increasing at each edge to form a smooth arc. Alternate coral and yellow wedges, then edge the full panel in teal sc.
  3. Legs: make four short sturdy tubes and add cream claws. Sew the sail panel along the center of the back, leaving the top edge free to form its fan outline.
  4. Attach the head and legs, then curve the long tail behind. Stitch the sail base from shoulder to hip and add a few hidden supports across its underside.

Assembly: Keep the sail as one continuous fan rather than separate spikes. Reinforce its base along the spine and let the colored wedges remain visible from the side.

11

Lilac Dome-Head Pachycephalosaurus

Lilac Dome-Head Pachycephalosaurus crochet design

A lilac pachycephalosaurus is topped with an oversized sunny-yellow dome and tiny blunt bumps. Its rounded skull, short arms and strong hind legs create a playful silhouette unlike the other long-snouted dinosaurs.

LEVEL
Confident beginner
TRY IT WITH
Worsted #4 yarn: lilac 95 yd, yellow 35 yd, cream 20 yd; 3.5 mm hook; stuffing
FINISHING NOTE
About 8 in tall (20 cm).

Short Pattern

Abbreviations: ch chain · sc single crochet · inc increase · dec invisible decrease · sl st slip stitch · BLO back loop only · MR magic ring

  1. Body: crochet a compact lilac torso, increasing to 30 sc and working 7 rounds. Shape a short neck and taper the lower body; stuff firmly before closing.
  2. Head: make a rounded lilac head with a short blunt muzzle. Crochet the yellow dome as a half-sphere, increasing to a broad cap and decreasing across the final rounds.
  3. Legs: make two sturdy hind legs and two short arms. Add small yellow bumps along the rear edge of the dome with tiny bobble stitches.
  4. Sew the dome centered on the crown, then attach the head to the body. Place the legs beneath the hips and arms high on the chest; embroider the face.

Assembly: Check the dome from the front and side before stitching it down so it sits centered. Keep the bumps small and evenly spaced around the back rim.

12

Midnight Feathered Archaeopteryx

Midnight Feathered Archaeopteryx crochet design

A midnight-blue archaeopteryx combines a small beaked head, feathered wings and a long layered tail. Teal and cream crochet feathers add striking color while keeping the prehistoric bird-like dinosaur separate from a fantasy dragon.

LEVEL
Advanced
TRY IT WITH
Worsted #4 yarn: midnight blue 100 yd, teal 40 yd, cream 30 yd, charcoal 15 yd; 3.25 mm hook; stuffing
FINISHING NOTE
About 10 in tall with 11 in wingspan (25 × 28 cm).

Short Pattern

Abbreviations: ch chain · sc single crochet · inc increase · dec invisible decrease · sl st slip stitch · BLO back loop only · MR magic ring

  1. Body: crochet a narrow upright torso with a small beaked head, then add two slim legs with curved toes. Stuff the torso lightly so it can be posed upright.
  2. Wings: make two mirrored panels in feather-shaped rows, beginning narrow at the shoulder and widening toward the tips. Layer short teal and cream feather pieces along the edges.
  3. Tail: crochet a long narrow base and attach graduated feather shapes along both sides. Add dark claw tips and embroider a bright eye ring around each eye.
  4. Sew the wings to the shoulders at matching angles and attach the tail low at the back. Position the legs beneath the body so the figure can balance in a standing pose.

Assembly: Layer feathers from tip toward the center so each overlaps neatly. Secure wing edges with hidden stitches and keep the long tail aligned with the body.

13

Coral Spiral Ammonite

Coral Spiral Ammonite crochet design

A colorful ammonite features a large coral, cream and ochre spiral shell attached to a small teal body and soft tentacles. Its fossil-like coil adds a distinctive prehistoric sea creature to the plush collection.

LEVEL
Intermediate
TRY IT WITH
Worsted #4 yarn: coral 35 yd, ochre 30 yd, cream 30 yd, teal 35 yd; 3.5 mm hook; stuffing
FINISHING NOTE
About 8 in across (20 cm).

Short Pattern

Abbreviations: ch chain · sc single crochet · inc increase · dec invisible decrease · sl st slip stitch · BLO back loop only · MR magic ring

  1. Shell: crochet a long stuffed tube in alternating coral, ochre and cream sections. Begin narrow, increase gradually, and lightly stuff as you work so the tube remains flexible.
  2. Coil the tube into a flat spiral, keeping each loop close to the previous one. Use matching yarn to tack the spiral at the back in several hidden places.
  3. Body: crochet a small teal oval and add 6–8 short tapered tentacles around the front edge. Embroider the eyes and add a small cream underside.
  4. Sew the coiled shell to the top of the body, anchoring the center and outer curve. Arrange tentacles forward and slightly outward so they remain visible beneath the shell.

Assembly: Keep the spiral flat and evenly spaced; tack each coil from the reverse. Attach the shell low enough that the teal face and tentacles are not hidden.

14

Mint Duckbill Hadrosaur

Mint Duckbill Hadrosaur crochet design

A mint hadrosaur has a broad, flat peach beak, low head crest, dark teal back stripe and tiny coral spots. Its smooth four-legged profile offers a clean contrast to the sail- and armor-backed designs.

LEVEL
Confident beginner
TRY IT WITH
Worsted #4 yarn: mint 105 yd, peach 35 yd, dark teal 20 yd, coral 10 yd; 3.5 mm hook; stuffing
FINISHING NOTE
About 9 in long (23 cm).

Short Pattern

Abbreviations: ch chain · sc single crochet · inc increase · dec invisible decrease · sl st slip stitch · BLO back loop only · MR magic ring

  1. Body: crochet a long oval torso in mint, increasing to 36 sc and working 8 rounds even. Shape a gentle slope into the neck and taper the tail; stuff firmly.
  2. Head: make a rounded piece with a broad flat peach beak sewn across the front. Add a small mint crest on the crown and embroider nostrils near the beak edge.
  3. Legs: crochet four short, sturdy tubes and attach cream toe stitches. Work a dark teal surface stripe from the crown down the back to the tail; add coral spot stitches on the sides.
  4. Sew the head to the neck, align the back stripe with the center line, then attach the four legs so the body stands evenly. Add the tail at a shallow upward angle.

Assembly: Flatten the beak before sewing so it reads as a broad duckbill. Keep the crest low and the back stripe continuous from head to tail.

MAKER'S NOTE

Make thoughtfully and check as you go.

Yarn, hook size and personal tension can change the finished scale. Count every round, stuff gradually and use embroidered features instead of safety eyes when making toys for children under three.