These crochet shawl ideas focus on classic triangle and shoulder-wrap silhouettes: pieces that drape over the shoulders rather than functioning as ponchos or ruanas. The collection explores airy leaf lace, warm shell textures, colorwork, medallions and everyday stitches. Instructions use US crochet terms and give a practical starting point; finished measurements depend on yarn, hook and personal gauge. Make a small swatch before beginning, and add or remove repeat rows to adjust the wingspan and depth.
Forest Leaf Triangle Shawl
Deep forest and sage-green yarn form a generous triangle filled with leaf-like openwork and a softly scalloped border. The lace keeps the wrap light over a winter outfit, while the dark edging gives the delicate motif a defined silhouette.
- LEVEL
- Intermediate
- TRY IT WITH
- DK-weight cotton-wool blend: forest green 420 yd, sage 260 yd; 4 mm hook; stitch markers; tapestry needle.
- FINISHING NOTE
- Approx. 64 in / 163 cm wingspan and 30 in / 76 cm depth after blocking; adjust by adding or removing pattern repeats.
Short Pattern
Abbreviations: US terms: ch chain · sl st slip stitch · sc single crochet · dc double crochet · tr treble crochet · sk skip · sp space · ch-sp chain space · rep repeat.
- Foundation: ch 5 and join with a sl st to make a ring. Ch 4 (counts as dc and ch 1), then work 3 dc, ch 2, 3 dc, ch 1 and dc into the ring. Turn. The center ch-2 space forms the point of the triangle.
- Set-up rows: ch 4, dc in the first stitch, ch 1, work 3 dc in the next ch-1 space, ch 1, then work 3 dc, ch 2, 3 dc into the center ch-2 space. Add ch 1, 3 dc in the final ch-1 space, ch 1 and dc in the turning chain. Turn each row.
- Leaf-lace rows: continue increasing at both outer edges and in the center point. In every second row, replace selected 3-dc groups with a leaf repeat: *dc, ch 2, tr in the next space, ch 2, dc*; work the next group as 3 dc. Stagger the leaf repeats so they form diagonal branches. Repeat until the shawl measures about 27 in from center top to point.
- Border: work one round of sc evenly along both sloping sides, placing 3 sc in the center point. For the edging, *skip 1 stitch, work 5 dc in the next stitch, skip 1, sl st in the next*; repeat along the sides and finish with a sl st at the point. Fasten off and weave in ends.
- Block gently: pin the center point and both wings to the target dimensions, then open the lace leaves evenly. Use steam from a distance or damp-block according to the yarn label; let the shawl dry fully before unpinning.
Assembly: Check that the center point and both wings are balanced before fastening off the border. Secure the final end on the wrong side, then block the leaf motifs open without stretching the scallops into sharp points.
Sunset Petal Triangle Shawl
Terracotta, dusty rose and apricot make a warm sunset gradient across this softly draped triangle shawl. Repeating shell clusters create a petal-like texture, while a tiny picot finish outlines the sloping edges without making the wrap feel heavy.
- LEVEL
- Confident beginner
- TRY IT WITH
- DK-weight wool blend: terracotta 250 yd, dusty rose 220 yd, apricot 180 yd; 4.5 mm hook; tapestry needle.
- FINISHING NOTE
- Approx. 62 in / 157 cm wingspan and 28 in / 71 cm depth; make additional rows for a deeper shoulder wrap.
Short Pattern
Abbreviations: US terms: ch chain · sl st slip stitch · sc single crochet · hdc half double crochet · dc double crochet · sk skip · sp space · rep repeat · picot ch 3, sl st in first ch.
- Begin at the point: ch 4 and work 2 dc, ch 2, 3 dc into the first chain. Turn. For each row, ch 3 (counts as dc), work 2 dc in the first stitch, then repeat *ch 1, skip 1, 3 dc in the next space* to the center. Work 2 dc, ch 2, 2 dc in the center space, then mirror the shell pattern to the other edge; finish with 3 dc in the turning chain.
- Build the shawl: turn and repeat the increase row, adding one shell group to each half on every row. Keep the center increase consistent so the triangle stays flat. Change from terracotta to dusty rose after about one-third of the rows, carrying the unused strand loosely at the edge; change to apricot for the final third.
- Add a textured accent: on every fourth row, work *3 dc, ch 1, 3 dc* into one shell space to create a fuller petal cluster. On intervening rows, use the standard 3-dc shell. Continue until the wingspan is about 60 in or the desired length.
- Edge: work sc along both sloping sides, placing 3 sc in the center point and 2 sc around each row-end dc group. Along the top edge, work 1 sc in each stitch and space. For a picot finish, *sl st, ch 3, sl st in the same stitch, skip 1* around the two sloping sides.
- Fasten off, weave in the color-change ends, and wet-block the shawl with the point centered. Shape each wing evenly and allow it to dry flat so the shell rows relax into a soft drape.
Assembly: Join new colors at the outer edge so the transition sits in the border rather than across a shell. Weave each tail through matching-color stitches, then check that the picots point outward consistently before blocking.
Midnight Tide Color-Block Wrap
Navy, sea-glass teal and ochre-gold create a striking layered triangle wrap with a geometric filet center. Solid bands add warmth around the neck, while the open mesh and bold scalloped edge keep the broad shawl light and fluid over a coat.
- LEVEL
- Intermediate
- TRY IT WITH
- Worsted-weight wool blend: navy 330 yd, sea-glass teal 260 yd, ochre 140 yd; 5 mm hook; tapestry needle.
- FINISHING NOTE
- Approx. 68 in / 173 cm wingspan and 32 in / 81 cm depth; block to the desired drape without pulling the mesh out of shape.
Short Pattern
Abbreviations: US terms: ch chain · sl st slip stitch · sc single crochet · dc double crochet · sk skip · sp space · ch-sp chain space · rep repeat.
- Work from the center point: ch 5 and join into a ring. Ch 3, work 3 dc, ch 2, 4 dc into the ring. Turn. At the start of each row, ch 3 and work 2 dc in the first stitch; work dc groups separated by ch-1 spaces, then make 2 dc, ch 2, 2 dc in the center space. Mirror the groups and finish with 3 dc in the last stitch.
- Create the navy collar band: work the first 5 rows in solid dc groups, keeping the edge and center increases. Switch to sea-glass teal and begin filet rows: *dc, ch 1, skip 1* across each section, placing solid dc groups at both edges and a clear increase in the center. Repeat the filet texture for 8 rows.
- Add a second navy band of 3 solid rows, then return to teal mesh. For a longer wrap, repeat the teal mesh and navy band once more, keeping color changes at the row edge. Do not carry yarn across open mesh; fasten off each color and rejoin neatly at the same edge.
- Border: with ochre, work sc evenly along both sloping edges and place 3 sc in the center point. Work *skip 2 stitches, 5 dc in the next stitch, skip 2, sl st in the next* along the sides for broad shells. Work a plain sc row across the top edge to stabilize the neckline.
- Weave in ends on the reverse, especially at each color change. Pin the triangle point and wings to a flat surface; lightly steam or wet-block following the yarn label, preserving the square mesh openings and the scalloped outline.
Assembly: Fasten each color at the edge rather than carrying it through the filet mesh, which keeps the openwork clean on both sides. Align the navy bands before weaving ends and block the mesh square without stretching the ochre scallops.
Frosted Berry Mosaic Shawl
Cranberry and winter-ivory bands frame a bold central diamond on this warm triangle shawl. Textured clusters give the motif a mosaic look, while alternating tassels along the angled edges add movement without obscuring the geometric shape.
- LEVEL
- Confident beginner
- TRY IT WITH
- Worsted wool blend: cranberry 320 yd, ivory 300 yd; 5 mm hook; tapestry needle; small piece of cardboard for tassels.
- FINISHING NOTE
- Approx. 66 in / 168 cm wingspan and 31 in / 79 cm depth, before fringe.
Short Pattern
Abbreviations: US terms: ch chain · sl st slip stitch · sc single crochet · hdc half double crochet · dc double crochet · sk skip · sp space · rep repeat.
- With cranberry, ch 5 and join into a ring. Ch 3, work 3 dc, ch 2, 4 dc into the ring. Turn; for each row, ch 3, work 2 dc in the first stitch, then dc groups separated by ch-1 spaces to the center. Work 2 dc, ch 2, 2 dc in the center space and mirror the groups; finish with 3 dc in the last stitch.
- Work 4 rows in cranberry and 4 in ivory, changing at the row edge. Keep the center increase in every row. For the mosaic diamond, use a 10-row repeat: work a small cluster of 3 dc in the same space, then ch 1; on the next row place the cluster in the ch-1 gap between clusters. Shift the cluster repeat outward by one space every two rows to widen the diamond.
- Continue increasing until the shawl reaches about 29 in deep. End with 3 rows of cranberry in dc groups. Fasten off each shade at the edge rather than carrying it through the open spaces, then weave tails along matching-color rows.
- Border: work sc along both sloping edges, placing 3 sc at the point. Add short tassels every 5 stitches, alternating cranberry and ivory; knot each tassel securely through two border stitches and trim evenly. Block flat to open the diamond and even the outline.
Assembly: Keep the two colors joined only at row edges so the back stays tidy. Attach tassels after blocking, spacing them consistently and securing each through the sturdy sc border rather than the lace spaces.
Oatmeal Cable Triangle Shawl
Oatmeal and camel yarn create a softly substantial triangle shawl with raised cable columns running from neckline to point. The combination of a ribbed top edge and a scalloped perimeter gives this classic cold-weather layer a polished, heirloom feel.
- LEVEL
- Intermediate
- TRY IT WITH
- Aran-weight wool blend: oatmeal 470 yd, camel 150 yd; 5.5 mm hook; cable needle optional; stitch markers.
- FINISHING NOTE
- Approx. 64 in / 163 cm wingspan and 30 in / 76 cm depth; cable texture relaxes slightly after blocking.
Short Pattern
Abbreviations: US terms: ch chain · sl st slip stitch · sc single crochet · hdc half double crochet · dc double crochet · FPdc front-post double crochet · BPdc back-post double crochet · rep repeat.
- Make the center-point triangle in oatmeal: ch 5, join into a ring, then ch 3, work 3 dc, ch 2, 4 dc into the ring. Turn and increase at both edges and in the center on every row, keeping a 2-dc group at each outer edge and the center ch-2 increase.
- Work 6 setup rows in hdc. Mark five cable columns across each half, leaving a plain hdc stitch between columns. On cable rows, work FPdc around the next marked stitch and the following stitch; cross the first post stitch in front of the second to form a twist. Work 2 plain rows between cable rows, maintaining the triangular increases.
- For a subtle two-tone effect, change to camel for the cable columns only: work the post stitches in camel and the background hdc in oatmeal, catching the unused yarn loosely at the back. Repeat the cable row every third row until the shawl is 28 in deep, then finish with 3 plain hdc rows in oatmeal.
- Work one sc round around the perimeter, placing 3 sc at the point. Add a final shell edge: *skip 1, 5 dc in the next stitch, skip 1, sl st* along the two sloping sides. Block the triangle gently, opening the cables without flattening their raised texture.
Assembly: Use markers to keep each cable column aligned as the shawl widens. Secure the camel strand inside the post-stitch columns, weave the ends on the reverse and block from the center point outward.
Lavender Diamond Lace Shawl
A light lavender triangle shawl combines airy diamond lace with a delicate scalloped edge and soft corner fringe. The gentle gray undertone keeps the pastel color elegant, making this a graceful shoulder wrap for layering over a warm winter outfit.
- LEVEL
- Intermediate
- TRY IT WITH
- Sport-weight wool-alpaca blend: lavender 520 yd; 4 mm hook; blocking pins; tapestry needle; optional fringe yarn.
- FINISHING NOTE
- Approx. 70 in / 178 cm wingspan and 32 in / 81 cm depth after blocking.
Short Pattern
Abbreviations: US terms: ch chain · sl st slip stitch · sc single crochet · dc double crochet · tr treble crochet · sk skip · sp space · rep repeat.
- Start at the point with ch 5 joined into a ring. Ch 4, work 3 dc, ch 2, 4 dc into the ring. Turn and increase at both edges and the center each row. Establish a plain dc-and-chain-space triangle for 5 rows so the lace foundation lies flat.
- Diamond repeat: on the first lace row, work *dc, ch 2, skip 2 stitches* across each half, keeping solid dc groups at each outer edge and the center increase. On the next row, work dc into each dc and make a 2-dc cluster in every ch-2 space. For the following row, work a tr into the space between clusters, ch 2, then dc in the next dc to create the crossing lines.
- Repeat the three-row diamond sequence, adding one repeat to each half as the triangle grows. Continue until the center depth is about 29 in. Finish with two rows of dc, keeping the center point and edge increases consistent.
- For the border, work sc evenly along both sides and 3 sc at the point. Add a small shell edge with *skip 2, 5 dc in next stitch, skip 2, sl st*. Add optional short fringe only at the two outer corners, then wet-block each diamond open and let dry fully.
Assembly: Pin the center point first, then the two top corners, before opening the lace diamonds. Keep any corner fringe short and evenly trimmed so it does not pull the lightweight fabric out of shape.
Alpine Snowflake Colorwork Shawl
Pine-green and cream colorwork gives this triangular shawl a crisp alpine character, with snowflake diamonds repeated across a sturdy fabric. A simple fringe finishes the border, while the generous triangle offers a cozy layer for the coldest days.
- LEVEL
- Intermediate
- TRY IT WITH
- Worsted wool: pine 380 yd, cream 300 yd; 5 mm hook; stitch markers; tapestry needle; optional fringe yarn.
- FINISHING NOTE
- Approx. 66 in / 168 cm wingspan and 32 in / 81 cm depth.
Short Pattern
Abbreviations: US terms: ch chain · sl st slip stitch · sc single crochet · hdc half double crochet · dc double crochet · inc increase · rep repeat.
- With pine, begin at the center point: ch 5 and join. Ch 3, work 3 dc, ch 2, 4 dc into the ring. Turn and make a dc triangle with edge and center increases on each row. Work 4 setup rows in hdc to create a dense base for colorwork.
- Charted-look band: use hdc and a 12-stitch repeat. Work cream stitches in a stepped diamond: 2 cream, 2 pine, 4 cream, 2 pine, 2 cream across the repeat; shift the cream center by one stitch on each following row to form a snowflake-like diamond. Carry the unused color loosely and catch it every 4 stitches.
- Repeat the motif band, adding stitches at both edges and the center as the triangle expands. Work 3 plain pine rows between motif bands. Stop when the shawl reaches the planned depth, then work 2 final rows in pine. Keep carried strands relaxed so the colorwork does not pucker when the shawl is worn.
- Edge with one round of sc in pine, then add a simple cream picot every 5 stitches along both sloping sides. Weave in ends, lightly block the triangle, and add evenly spaced fringe to the sloping edges if desired.
Assembly: Catch carried yarn often enough that no long floats remain on the reverse, but keep each float loose across the expanding rows. Add fringe only after blocking and secure the yarn tails beneath the border stitches.
Cloudline Ombre Ridge Shawl
An icy-blue-to-midnight gradient sweeps through this easy-to-wear triangle shawl, accented by raised diagonal ridges and a softly scalloped edge. The mostly solid stitch pattern makes the ombre yarn the star while adding dependable warmth around the shoulders.
- LEVEL
- Confident beginner
- TRY IT WITH
- Worsted self-striping or gradient wool: approx. 700 yd; 5 mm hook; stitch markers; tapestry needle.
- FINISHING NOTE
- Approx. 68 in / 173 cm wingspan and 31 in / 79 cm depth; size depends on gradient yarn and gauge.
Short Pattern
Abbreviations: US terms: ch chain · sl st slip stitch · sc single crochet · hdc half double crochet · dc double crochet · FPdc front-post double crochet · rep repeat.
- Start with ch 5 joined into a ring. Ch 3, work 3 dc, ch 2, 4 dc into the ring. Turn and increase at both edges and in the center on every row, working hdc across for a compact, warm fabric. Place a marker in the center space to keep the point easy to find.
- After every 5 hdc rows, add a raised ridge row: work hdc across to the center, make the center increase, then work FPdc around the next stitch every 6 stitches on each half, using hdc in all remaining stitches. Shift the ridge positions by 3 stitches on each ridge row for a diagonal chevron effect.
- Continue the increase rows and ridge accents until the gradient reaches the deepest navy and the shawl measures about 30 in from top edge to point. If using separate shades, change color at the row edge and weave in each tail along the same-color row; do not carry dark yarn across the pale section.
- Finish with a sc border around the entire shawl, placing 3 sc at the point. For a scallop, work *skip 1, 4 dc in the next stitch, skip 1, sl st*. Block lightly to even the edges without flattening the raised ridges.
Assembly: Keep the center marker in place until the final border is complete. Weave gradient yarn ends along the matching color transitions, then block only enough to smooth the triangle and retain the ridges.
Golden Hour Fan-Lace Shawl
Amber and ochre fan stitches radiate from the center point of this luminous triangle shawl. Repeated shells build an open lace that drapes beautifully, and a matching scalloped border echoes the fans for a polished, richly textured finish.
- LEVEL
- Confident beginner
- TRY IT WITH
- DK-weight cotton-wool blend: amber 300 yd, ochre 280 yd; 4.5 mm hook; tapestry needle.
- FINISHING NOTE
- Approx. 64 in / 163 cm wingspan and 29 in / 74 cm depth after blocking.
Short Pattern
Abbreviations: US terms: ch chain · sl st slip stitch · sc single crochet · dc double crochet · sk skip · sp space · rep repeat.
- With amber, ch 5 and join into a ring. Ch 3, work 3 dc, ch 2, 4 dc into the ring. Turn; increase at both edges and in the center every row, working a base of dc groups separated by ch-1 spaces for 4 rows.
- Fan row: work 5 dc in each marked ch-1 space, separated by ch 2, and use a single dc in the space between fans on the next row. Keep edge groups solid and work the center increase into the center ch-2 space. On the following row, place each new fan in the ch-2 gap at the center of the fan below.
- Change to ochre after 8 rows, then alternate 4-row bands of amber and ochre. Continue the fan repeat, adding one new fan to each half on every other repeat as the shawl widens. Stop at the desired wingspan and finish with one plain dc row in amber.
- Work sc around the top edge and both slopes; place 3 sc in the center point. Add a fan border by working 5 dc in every other edge stitch with a sl st between fans. Fasten off and block with the lace fans spread evenly.
Assembly: Place a marker at the center point and at each color transition so the fan rows remain symmetrical. Weave each shade into its own band and shape the scallops individually while blocking.
Wildflower Heirloom Triangle Shawl
Small plum, rose and moss flower motifs sit against a creamy crochet base in this heirloom-inspired triangle shawl. A neat solid border frames the flowers and the deep pointed drape, creating a colorful layer that still feels classic and wearable.
- LEVEL
- Intermediate
- TRY IT WITH
- DK cotton-wool blend: cream 360 yd, plum 100 yd, dusty rose 90 yd, moss 70 yd; 4 mm hook; yarn needle.
- FINISHING NOTE
- Approx. 62 in / 157 cm wingspan and 30 in / 76 cm depth; motif count determines final width.
Short Pattern
Abbreviations: US terms: ch chain · sl st slip stitch · sc single crochet · hdc half double crochet · dc double crochet · sk skip · sp space · rep repeat.
- Make flower squares: with a flower shade, ch 4 and join. Work 8 dc into the ring and join. Change to cream; *ch 3, sc in next stitch* around for 8 petals. In the next round, work 3 dc in each ch-3 loop and 3 dc, ch 2, 3 dc in four alternating corner loops to square the motif. Make enough motifs for a triangle layout, adding one square to each side on each new row.
- Join motifs with cream using sc through both loops along matching edges. Lay them out in descending rows to form a triangle, with a single motif at the center point and wider rows toward the top. Keep the join direction consistent so the flower centers line up diagonally.
- Work a cream dc border around the triangle, placing 3 dc in each outer corner and 3 dc, ch 2, 3 dc at the lower point. Add 2 plain rows in hdc to stabilize the motif fabric. If the upper edge ripples, reduce stitches evenly on the next row; if it cups, add a few hdc across the edge.
- Finish the sloping edges with a simple picot border: *sc, ch 3, sl st in the first chain, skip 1 stitch*. Weave in each motif color on the wrong side and block gently, pinning the center point and the top corners first.
Assembly: Join motifs before adding the border and check that flower colors are balanced across both halves. Secure each join at the corners, then block the triangle flat so the motif rows form a clean diagonal edge.
Rosewater Medallion Triangle Shawl
Dusty-rose flower medallions linked with cream mesh create a delicate but substantial triangular shawl. The motif border follows the triangle’s outline, while the central point and repeating lace make the wrap feel like a treasured vintage accessory.
- LEVEL
- Intermediate
- TRY IT WITH
- Fingering-weight cotton-wool: dusty rose 360 yd, cream 330 yd; 3.75 mm hook; tapestry needle; blocking pins.
- FINISHING NOTE
- Approx. 66 in / 168 cm wingspan and 30 in / 76 cm depth, depending on motif placement.
Short Pattern
Abbreviations: US terms: ch chain · sl st slip stitch · sc single crochet · dc double crochet · tr treble crochet · sp space · rep repeat.
- Medallion: with rose, ch 6 and join. Work *dc, ch 1* 12 times into the ring. In cream, work 3 dc in each ch-1 space, joining with sl st. For the next round, make *3 dc, ch 2, 3 dc* in every third space to create corners, and 3 dc in the other spaces. Make motifs in rows that increase by one motif on each side to form a triangle.
- Join motifs with cream as you go: on the final round, replace the ch-2 corner space with ch 1, sc into the matching corner of the neighboring motif, ch 1; along straight edges, use sc joins at every second ch-space. Keep the joining yarn relaxed to preserve the lace.
- Work mesh fill into the gaps between motifs: attach cream at a gap, *ch 5, sc into the next open space* across, turning at each row and decreasing one mesh arch at each sloping edge. Continue until the triangular spaces between motifs are filled and the fabric lies flat.
- Finish with one round of sc in rose around the perimeter, placing 3 sc at the point. Add a small shell border in cream, weave in ends, and block the medallions open with pins placed at each flower tip.
Assembly: Join motifs with the wrong sides facing and keep the cream join stitches even. Fill any small gaps with mesh arches before the final border, then pin each medallion evenly during blocking to avoid a wavy edge.
Slate Ridge Everyday Shawl
Charcoal and heather-gray bands alternate across this substantial triangle shawl, with ribbed ridges adding depth to the understated palette. Its mostly solid texture gives dependable warmth and a clean silhouette for everyday cold-weather layering.
- LEVEL
- Confident beginner
- TRY IT WITH
- Worsted wool: charcoal 360 yd, heather gray 300 yd; 5 mm hook; stitch markers; tapestry needle.
- FINISHING NOTE
- Approx. 68 in / 173 cm wingspan and 32 in / 81 cm depth after a light block.
Short Pattern
Abbreviations: US terms: ch chain · sl st slip stitch · sc single crochet · hdc half double crochet · FPdc front-post double crochet · BPdc back-post double crochet · rep repeat.
- With charcoal, ch 5 and join into a ring. Ch 2, work 2 hdc, ch 2, 3 hdc into the ring. Turn. Work hdc across, making 2 hdc in the first stitch, 2 hdc, ch 2, 2 hdc in the center space and 2 hdc in the last stitch. Repeat the edge and center increases on every row.
- Work 6 rows in hdc, then 2 rows in a rib sequence: *FPdc around next stitch, BPdc around next stitch* across each half, keeping the center increase in hdc. Change to heather gray at the row edge and work 8 hdc rows. Alternate charcoal ridge bands and gray plain bands as the triangle grows.
- Continue until the shawl measures about 30 in from the top edge to the point. End with 4 rows of charcoal hdc. Keep the post stitches loose enough to stretch across the growing row and avoid tightening the center space.
- Work one sc edging round around the whole triangle, with 3 sc in the point. Add a second round of reverse single crochet (crab stitch) if desired. Weave in ends along matching color bands and block lightly to smooth the edges without flattening the ribs.
Assembly: Keep all color changes at the outer edge and weave each tail along the inside of its matching band. Measure both wings before the last border round so the shawl remains balanced and the point hangs straight.
Winter Garden Trellis Shawl
Sea-glass teal and ivory trellis panels alternate with warm solid rows in this airy triangle shawl. Small crocheted flower accents punctuate the mesh, and a picot outline finishes the long sides with a subtle, handmade flourish.
- LEVEL
- Intermediate
- TRY IT WITH
- DK-weight wool blend: sea-glass teal 330 yd, ivory 280 yd; 4.5 mm hook; small amount of matching yarn for flower accents; tapestry needle.
- FINISHING NOTE
- Approx. 64 in / 163 cm wingspan and 30 in / 76 cm depth after blocking.
Short Pattern
Abbreviations: US terms: ch chain · sl st slip stitch · sc single crochet · hdc half double crochet · dc double crochet · sk skip · sp space · picot ch 3, sl st in first ch.
- With teal, start from the center point: ch 5 and join. Ch 3, work 3 dc, ch 2, 4 dc into the ring. Turn and make a triangle with dc groups, increasing at both edges and in the center every row for 4 setup rows.
- Trellis panel: switch to ivory and work *dc, ch 2, skip 2 stitches* across each half, placing solid dc at both outer edges and a clear increase in the center. On the following row, work 2 dc in each ch-2 space. Repeat these two rows for 4 rows total, then change back to teal for 3 solid hdc rows.
- Repeat the ivory trellis and teal band sequence, adding one trellis repeat to each half as the triangle widens. To make the small flower accents, work 5 hdc into a magic ring in ivory, join and fasten off; sew one flat flower at the center of every other trellis panel, keeping the accents light so the mesh still drapes.
- Finish with a teal sc border around all sides and 3 sc at the point. Add a picot every 6 stitches along the two sloping edges. Weave in the ends, pin the point and top corners, and block the trellis squares open without stretching the flowers.
Assembly: Sew the small flowers flat at panel centers with matching yarn and keep the back stitches short so they do not snag. Check that the trellis bands mirror one another across the center point before adding the picot edge.
Make thoughtfully and check as you go.
Yarn, hook size and personal tension can change the finished scale. Count every round, stuff gradually and use embroidered features instead of safety eyes when making toys for children under three.